NFM-20 Series
| Applications Non-patient contact medical General electronics IT equipment Industrial |
|
 |
Features Universal AC input/full range Ultra low profile Low leakage current <200uA No load power consumption <0.75W Short circuit, OLP, OVP & OTP Fixed switching frequency at 90KHz UL60601-1, IEC60601-1 & TUV EN60601-1 medical safety approved Cooling by free air convection |
| Part Number | Voltage | Current (amps) | Power (watts) |
| NFM-20-3-3 | 3.3V | 4.5A | 15W |
| NFM-20-5 | 5V | 4.4A | 22W |
| NFM-20-12 | 12V | 2A | 22W |
| NFM-20-15 | 15V | 1.4A | 21W |
| NFM-20-24 | 24V | 1A | 22.08W |
Specification
Input Voltage 85 ~ 264VAC 120 ~ 370VDC
Input Frequency 47 ~ 440Hz
AC Current 0.6A/115VAC 0.4A/230VAC
Inrush Current 30A/115VAC 65A/230VAC typically, cold start
Setup, Rise Time 500ms, 20ms/230VAC 500ms, 20ms/115VAC at full load
Holdup Time 50ms/230VAC 16ms/115VAC typically at full load
Overload Protection Above 105% rated output power
Over Voltage Protection Protection type Shut off
Over Temperature Protection 160°C typically (U1) Detect on main control IC
Working Humidity 20 ~ 90% RH non-condensing
Temperature Coefficient ±0.03%/°C (0 ~ 50°C)
Vibration 10 ~ 500Hz, 2G 10min./1cycle, Period for 60min.each along X, Y, Z axes
Withstand Voltage I/P-O/P:4KVAC I/P-FG:1.5KVAC O/P-FG:1.5KVAC
Isolation Resistance I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
Description
Featuring a low leakage current of 200uA at 264VAC this unit can be equipped into non-patient contact medical equipment and still comply with class B as per EMI regulations. With energy saving and the environment in mind the no load power consumption is lower than 0.75W so that it complies with the requirements for “green mode” power supplies. Standard functions include short circuit, over load and over voltage protections and over temperature protection is equipped on the whole NFM series. Suitable for use in general medical or for industrial usage that require low leakage current, general electronic applications and low profile IT equipment these on-board type PSU’s can be applied on the main control PCB of the final systems.